Feeding holes at the bottom.
Smooth holes perpendicular to the rod.
Key provided
Seals kits are available on stock
Hydraulic block cylinders BDD
Other products
How to choose a Hydraulic block cylinders BDD Guide ?
Access Hydraulic block cylinders BDD 's products
Access selection
Back to Hydraulic block cylinders
Hydraulic block cylinders – BDD F1 Type
Test pressure: 500 bars
Max working pressure: 350 bars
- Double rod sealing
- Solid body with burnished bore
- Solid piston rod, heat treated steel
- Strokes ± 0,3mm
- Warranty 2 years or 400 km (4 million cycles for a stroke of 50 mm)
- HELD IN STOCK
| TYPE | Units | BDD10 | BDD25 | BDD40 | BDD65 | BDD100 | BDD160 |
| Piston | (mm) | 16 | 25 | 32 | 40 | 50 | 63 |
| Rod | (mm) | 10 | 16 | 20 | 25 | 32 | 40 |
| Pushing force at 100 bars | (kN) | 2.0 | 4.9 | 8.0 | 12.5 | 19.6 | 31.1 |
| Pulling force at 100 bars | (kN) | 1.2 | 2.9 | 4.9 | 7.7 | 11.6 | 18.6 |
| a | (mm) | 60 | 65 | 75 | 85 | 100 | 125 |
| b | (mm) | 35 | 45 | 55 | 63 | 75 | 95 |
| c | (mm) | 6 | 7 | 10 | 10 | 10 | 14 |
| f | (mm) | 30 | 50 | 55 | 63 | 76 | 95 |
| g | (mm) | 6.5 | 8.5 | 10.5 | 10.5 | 13 | 17 |
| h | (mm) | 30 | 33 | 38 | 40 | 44 | 50 |
| j | (mm) | 8 | 10 | 12 | 12 | 16 | 20 |
| k | (mm) | 17.5 | 22.5 | 27.5 | 31.5 | 37.5 | 47.5 |
| øv | (mm) | 3.5 | 4 | 5 | 6 | 6 | 8 |
| øw x depth | (mm) | 9.8 x 1.1 | 9.8 x 1.1 | 9.8 x 1.1 | 9.8 x 1.1 | 10.8 x 1.1 | 13.8 x 1.5 |
| n | (mm) | 20.5 | 21 | 25 | 27 | 29.5 | 32 |
| z | (mm) | 2 | 2 | 3 | 3 | 5 | 5 |
| z’ | (mm) | 4 | 6 | 5 | 5 | 5 | 7 |
| Stroke | (mm) | 16 | 20 | 25 | 25 | 25 | 30 |
| Body length (L) | (mm) | 56 | 64 | 75 | 79 | 90 | 102 |
| Between feeding holes (m) | (mm) | 28.5 | 35 | 40 | 42 | 47.5 | 54 |
| Stroke | (mm) | 50 | 50 | 50 | 50 | 50 | 63 |
| Body length (L) | (mm) | 91 | 94 | 100 | 104 | 115 | 135 |
| Between feeding holes (m) | (mm) | 63.5 | 65.5 | 65 | 67 | 72.5 | 87 |
| Between fixing holes (h1) | (mm) | 36.5 | 35 | 35 | 37 | 41 | 44 |
| Stroke | (mm) | – | 100 | 100 | 100 | 100 | 100 |
| Body length (L) | (mm) | – | 144 | 150 | 154 | 165 | 172 |
| Between feeding holes (m) | (mm) | – | 115 | 117 | 119 | 125 | 129 |
| Between fixing holes (h1) | (mm) | – | 85 | 85 | 87 | 91 | 81 |
| 3D Model | 3D | 3D | 3D | 3D | 3D | 3D |
Rod ends
| TYPE | Units | BDD10 | BDD25 | BDD40 | BDD65 | BDD100 | BDD160 |
| ød | (mm) | 10 | 16 | 20 | 25 | 32 | 40 |
| B | (mm) | 4.5 | 5.8 | 7.5 | 8.5 | 9 | 12.2 |
| C | (mm) | M6 | M10 | M12 | M16 | M20 | M27 |
| øD | (mm) | 6.3 | 10.5 | 12.5 | 16.5 | 21 | 28 |
| øE | (mm) | 9.2 | 15.2 | 19 | 24 | 31 | 39 |
| K | (mm) | 8 | 13 | 17 | 22 | 27 | 36 |
| L | (mm) | 14 | 18 | 22 | 28 | 36 | 45 |
| M | (mm) | M8 x 1 | M14 x 1.5 | M16 x 1.5 | M20 x 1.5 | M27 x 2 | M33 x 2 |
| P | (mm) | 15 | 18 | 18 | 25 | 30 | 40 |
| Q | (mm) | 3 | 4 | 4 | 7 | 7 | 10 |
