close pdf print video more home burger search arrow

Hydraulic cylinders and components, hydraulic systems, gas springs & shell and tube heat exchangers : Quiri

Home » Quiri Hydromécanique » Hydraulic Clamping Systems » Hydraulic work supports

Hydraulic work supports

Different versions exist :

  • The rod is extended at rest
  • The rod may be in any position
  • The rod is retracted at rest

The work support’s rod comes into contact with the workpiece and then compresses the contact spring. The rod is then locked in position by the locking ring through the increased oil pressure.

The operating pressure of 300 bar enables a locking force from 5 to 24 kN.
The contact force by spring on the component to be machined is as small as possible between 8 and 100 N.

Print this catalog Consult the guide

Work support – Screw type M30 x1.5 – 500 bar – with metal scraper AVV_13

Single-acting - M30 - with metal scraper
Locking force at 500 bar: 6.5 kN

Work support – Screw type M30 x1.5 – 500 bar – with metal scraper AVV_ 14

Single-acting - M30 - with metal scraper
Locking force at 500 bar: 9.5 kN

Work support – Screw type M30 x1.5 – 500 bar – with vent AVHE 11

Single-acting - M30 - with metal scraper and vent
Locking force at 500 bar: 6.5 kN

Work support – Screw type M30 x1.5 – 500 bar – with vent AVHE 12

Single-acting - M30 - with metal scraper and vent
Locking force at 500 bar: 9.5 kN

Work support – Screw type M36 M48 and M60 – 500 bar – with vent AVHE **

Single-acting - threaded - with vent
Locking force at 500 bar: 15 to 42 kN

Work support – Screw type M30 x1.5 – 500 bar – double-acting with metal scraper AVVD 11

Double-acting - Screw type
Locking force at: 6.5 kN

Work support – Screw type M30 x1.5 – 500 bar – double-acting with metal scraper AVVD12

Double-acting - Screw type
Locking force at 500 bar: 9.5 kN

Hydraulic work support – 500 bar – with flange ring and counter-bores under the head AVLH

Single-acting - counter-bores on head
Locking force at 500 bar: 12 to 35 kN

Hydraulic work support – 500 bar – with flange ring and supply taps AVLHT

Single-acting - tap on head
Locking force at 500 bar: 12 to 35 kN

Hydraulic work support – 500 bar – with base and counter-bores AVFH

Flanged supply base
Locking force at 500 bar: 12 to 35 kN

Hydraulic work support – 500 bar – with base and taps AVFHT

Supply through taps in the base
Locking force at 500 bar: 12 to 35 kN

Work support supplied through tapped ports or counter-bores under the head – 500 bar AVLT

Taps/counter-bores under head
Locking force at 500 bar: 16 to 102 kN

Work support with cartridge – 300 bar AVC

Cartridge type
Locking force at 300 bar: 5 to 20 kN

Work support with cartridge – 500 bar – hydraulic extension AVCH

Cartridge type
Locking force at 500 bar: 12 to 35 kN

Work support with screw cartridge – 500 bar – hydraulic extension AVCV

Cartridge type
Locking force at 500 bar: 16 to 102 kN

Work support, block version – 500 bar – hydraulic extension AVBH

Block version
Locking force at 500 bar: 12 to 35 kN

Work support, block version, self-locking – 400 bar AVBC

Double-acting - block version
Locking force at 400 bar: 18 and 40 kN

Work support 70 bars / 7 MPa / 1000 PSI – AVBP

Single acting - From M26 to M45
Operating pressure between 30 and 90 bars
Consult the guide
Print this catalog Consult the guide

    Let us advise you!

    * Required Field

    Back to top

    Si vous n’avez pas encore de compte, veuillez nous adresser
    votre demande via le formulaire de contact.