Hydraulic cylinders and components, hydraulic systems, gas springs & shell and tube heat exchangers : Quiri

Home » Quiri Hydromécanique » Hydraulic block cylinders » Double acting hydraulic cylinders HVB » Double acting hydraulic cylinders HVB FTT

Double acting hydraulic cylinders HVB FTT

(CNOMO type)
Operating pressure: 200 bar
Bare cylinder, fastened by tapped holes on rod side.

Characteristics

Characteristics

Operating pressure :
Max. supply pressure: 200 bar
Test pressure: 315 bar

Permissible speed: Max. speed 5 m/min

Temperatures :
Minimum: -20°C
Maximum: +80°C with Standard seal, +150°C with Viton seal.

Fluids :
HM-HL hydraulic mineral oils 10 to 40 Cst at 50°C.
Low flammability fluids class C or D

Filtration: ≤ 200 microns

Connection: In BSPP cylindrical gas with counterbore for sealing ring.

Commissioning:
To ensure correct operation, air in both cylinder chambers should be purged by loosening the fittings, oil unpressurized. When the fluid is free of emulsion, retighten the fittings.

Print this sheet

Double acting hydraulic cylinders HVB FTT : Double acting hydraulic cylinders HVB - Quiri - 2

Bore	Units	25	32	40	50	63	80	100	125
ød (ø Rod)	(mm)	16	18	22	28	36	45	56	70
øf	(mm)	36	40	45	56	63	80	100	125
P	(mm)	12	12	12	12	18	18	24	24
b	(mm)	45	56	63	75	85	106	125	160
p		G1/8	G1/8	G1/4	G1/4	G3/8	G3/8	G1/2	G1/2
øLa	(mm)	19	19	25	25	28	28	34	34
x	(mm)	34	45	45	53	56	63	70	80
TA		M6	M8	M10	M10	M12	M16	M18	M20
s	(mm)	34	42	45	56	65	80	97.5	125
t	(mm)	34	42	45	56	65	80	97.5	125
c	(mm)	16	20	25	28	28	32	38	40
v	(mm)	28	32	40	40	45	50	58	63
y	(mm)	46	48	55	57	71	74	81	93
L	(mm)	92	102	115	125	145	152	177	198

Strokes

Bore		25	32	40	50	63	80	100	125
Stroke Tolerance+2 0	5	X	X	X	X	X	X	X	X
	10	X	X	X	X	X	X	X	X
	16	X	X	X	X	X	X	X	X
	25	X	X	X	X	X	X	X	X
	40	X	X	X	X	X	X	X	X
	63	X	X		X	X	X	X	X
	100		X	X	X	X	X	X	X
	160			X	X	X	X	X	X

Rod ends

Double acting hydraulic cylinders HVB FTT : Double acting hydraulic cylinders HVB - Quiri - 3

Bore	Units	25	32	40	50	63	80	100	125
ød (ø Rod)	(mm)	16	18	22	28	36	45	56	70
ød / Al	(mm)	10	10	12	12	12	12	16	16
A	(mm)	20	20	25	32	40	50	63	80
øR	(mm)	9.5	9.5	13	17	23.5	29.5	38.5	48.5
øCl	(mm)	9.5	9.5	11.5	11.5	11.5	11.5	15	15
i	(mm)	2.5	2.5	3	3	3	4	5	5
M	(mm)	M12 x 1.25	M12 x 1.25	M16 x 1.5	M20 x 1.5	M27 x 2	M33 x 2	M42 x 2	M56 x 2
C	(mm)	M8 x 1.25	M8 x 1.25	M10 x 1.5	M16 x 1.5	M20 x 1.5	M27 x 2	M33 x 2	M42 x 2
Ml	(mm)	M8 x 1.25	M8 x 1.25	M10 x 1.25	M10 x 1.5	M10 x 1.5	M10 x 1.5	M12 x 1.25	M12 x 1.25
n	(mm)	0.2	0.2	0.2	0.2	0.3	0.3	0.5	0.5
øE	(mm)	14	15	18	22.5	28	35.5	45	56
øF	(mm)	8	9	11.2	14	18	22.4	28	35.5
H/J	(mm)	6	6	8	10	12.5	16	20	25
r	(mm)	0.3	0.3	0.5	0.5	0.8	0.8	1.2	1.2
B	(mm)	8	8	8	8	12.5	12.5	14	14
Bl	(mm)	5	5	6	6	6	6	8	8
K	(mm)	12	13	17	22	30	36	46	60
Ki	(mm)	8	8	10	10	10	10	13	13

Information rod

Double acting hydraulic cylinders HVB FTT : Double acting hydraulic cylinders HVB - Quiri - 4

Bore	Units	25	32	40	50	63	80	100	125
ød (ø Rod)	(mm)	16	18	22	28	36	45	56	70
a	(mm)	45	56	63	75	85	106	125	160
øBi	(mm)	36	36	42	42	63	63	80	80
ødi	(mm)	10	10	12	12	12	12	16	16
Ui	(mm)	8	8	12	12	12	12	15	15
Li	(mm)	20	20	32	32	32	32	35	35
L	(mm)	92	102	115	125	145	152	177	198