Hydraulic cylinders and components, hydraulic systems, gas springs & shell and tube heat exchangers : Quiri

Home » Quiri Hydromécanique » Hydraulic block cylinders » Hydraulic block cylinders BDE » Hydraulic block cylinders – BDE P Type

Hydraulic block cylinders – BDE P Type

Test pressure: 500 bars
Max working pressure: 350 bars

Tapped ports.
Fixture parallel to the rod.
Seals kits available on stock

Hydraulic block cylinders – BDE P Type : Hydraulic block cylinders BDE - Quiri

Characteristics

Characteristics

Key groove (key provided)
Solid body, burnished bore
Solid piston rod
Strokes ± 0,3mm
Guiding improved on piston and rod

Print this sheet

Hydraulic block cylinders – BDE P Type : Hydraulic block cylinders BDE - Quiri - 2

TYPE	Units	BDE 25	BDE 32	BDE 40	BDE 50	BDE 63	BDE 80	BDE 100	BDE 125
Piston ø	(mm)	25	32	40	50	63	80	100	125
Rod ø	(mm)	16	20	25	32	40	50	63	80
Pushing force at 100 bars	(kN)	4.9	8.0	12.5	19.6	31.1	50.2	78.5	122.7
Pulling force at 100 bars	(kN)	2.9	4.9	7.7	11.6	18.6	30.6	47.4	72.4
a	(mm)	65	75	85	100	125	160	200	230
b	(mm)	45	55	63	75	95	120	150	180
c	(mm)	7	10	10	10	14	14	15	16
g	(mm)	8.5	10.5	10.5	13	17	21	25	32
g1 x depth	(mm)	ø14 x 9	ø17 x 11	ø17 x 11	ø20 x 13	ø25 x 17	ø32 x 21	ø38 x 25	ø47 x 30.5
k	(mm)	22.5	27.5	31.5	37.5	47.5	60	75	90
n	(mm)	18	22	24	27	26	34	35	47
p		G1/4	G1/4	G1/4	G1/4	G1/2	G1/2	G1/2	G1/2
s	(mm)	50	55	63	76	95	120	158	180
t	(mm)	30	35	40	45	65	80	108	130
TA	(mm)	M8 x 12	M10 x 15	M10 x 15	M12 x 18	M16 x 24	M20 x 30	M24 x 36	M30 x 45
Stroke(C)<=130 mm
Body length (L)	(mm)	C+44	C+50	C+54	C+65	C+72	C+85	C+90	C+110
Between feeding holes (m)	(mm)	C+15	C+17	C+19	C+25	C+29	C+30	C+30	C+32
Stroke(C)>130 mm
Body length (L)	(mm)	C+58.5	C+66	C+70	C+86	C+90	C+106	C+108	C+137
Between feeding holes (m)	(mm)	C+18	C+20	C+22	C+28	C+33	C+34	C+34	C+36
Maximum stroke	(mm)	200	250	300	350	350	400	400	400
3D Model		3D	3D	3D	3D	3D	3D	3D	3D

Rod ends

Hydraulic block cylinders – BDE P Type : Hydraulic block cylinders BDE - Quiri - 3

TYPE	Unité	BDE 25	BDE 32	BDE 40	BDE 50	BDE 63	BDE 80	BDE 100	BDE 125
ød	(mm)	16	20	25	32	40	50	63	80
B	(mm)	5,8	7,5	8,5	9	12,2	12	12	13
C	(mm)	M10 x 1,5	M12 x 1,75	M16 x 2	M20 x 2,5	M27 x 3	M30 x 3,5	M42 x 4,5	M48 x 5
øD	(mm)	10,5	12,5	16,5	21	28	31	43	49
øE	(mm)	15,2	19	24	31	39	49	61,5	78
K	(mm)	13	17	22	27	36	46	55	70
L	(mm)	18	22	28	36	45	52	60	64
M	(mm)	M14 x 1,5	M16 x 1,5	M20 x 1,5	M27 x 2	M33 x 2	M39 x 2	M45 x 2	M52 x 2
P	(mm)	18	18	25	30	40	40	60	70
Q	(mm)	4	4	7	7	10	10	10	10

Options

WARNING:

For cylinders of this type with strokes >130mm, the 4 smooth mounting holes parallel to the rod are automatically replaced by 4 tapped holes (TA) on both sides.

TYPE	Units	BDE 25	BDE 32	BDE 40	BDE 50	BDE 63	BDE 80	BDE 100	BDE 125
TA	(mm)	M8 x 12	M10 x 15	M10 x 15	M12 x 18	M16 x 24	M20 x 30	M24 x 36	M30 x 45
LI	(mm)	8.5	10.5	10.5	13	17	21	25	32